Commercial Lock Repair & Replacement Washington DC
Not every lock problem needs a new lock. Sticking cylinders, worn mortise locks, and hard-to-turn deadbolts can often be repaired, while cracked or outdated hardware is better replaced.
DC Locks & Doors provides commercial lock repair and replacement for offices, retail stores, and buildings throughout Washington, DC. We start by finding which part is actually failing.
Jump to: storefront locks · mortise locks · cylinders and rekeying
Need Lock Repair Service?
Call (202) 919-5727 or request lock repair online. Open daily, 7 AM–11 PM.
Signs a Commercial Lock Needs Attention
Lock hardware wears down with daily use. These are the most common signs it's time to call:
- Key is hard to insert or turn, or only works with jiggling
- Deadbolt doesn't fully extend or retract
- Lever droops, feels loose, or won't retract the latch
- Mortise lock grinds or binds
- Lock works with the door open but not when it's closed
- You want to phase out old or unrestricted keys
Lock Body, Cylinder, Strike, or Alignment?
A lock that "doesn't work" can fail in four different places. Sorting out which one saves you from replacing parts that are fine:
- Lock body (mortise case or cylindrical chassis) — lever droops, latch won't retract, grinding; repair internal parts or replace the lock body
- Cylinder — key is hard to insert or turn; clean, repair, rekey, or replace just the cylinder
- Strike — latch or bolt rubs, binds, or won't fully extend into the frame; adjust or replace the strike
- Door alignment — lock works with the door open but not closed; fix hinges, closer, or frame (see commercial door repair)
Storefront Locks
Narrow aluminum storefront doors use slim deadlocks and deadlatches, such as Adams Rite, that are easy to wear out on a busy entrance. We repair, rekey, and replace storefront deadlocks, cylinders, and strikes. If the storefront door has sagged or no longer lines up with the frame, see commercial door repair.
Mortise Locks and Commercial Deadbolts
Mortise locks are standard on many commercial doors and are built to be serviced. We repair worn mortise lock cases, replace internal parts such as springs and levers, and service commercial deadbolts so they lock without forcing the door.
Cylinders and Rekeying
A worn or damaged cylinder is one of the most common lock repairs. In many cases we can rekey or replace just the cylinder rather than the whole lock, which keeps cost down and the job quick.
Electric Strikes and Keyless Entry
For businesses moving away from physical keys, we install electric strikes and keyless entry hardware that work with your existing door and lock where possible. See access control systems for keyless options.
Repair or Replace?
Most lock problems are repairable when the door and frame are in good shape. Replacement makes more sense when the lock body is cracked, the keyway is too worn to hold a key reliably, parts are no longer available, or you're upgrading to a higher security grade.
For a building-wide key plan, see master key systems. Our guide on when a DC business should upgrade its commercial locks covers the signs to watch for.
What Happens During the Appointment
We test the key, cylinder, and latch to see where the lock is failing, then check the strike and door alignment. If a repair will hold, we explain the price and fix it. If parts are worn or the hardware is outdated, we go over replacement options first. Every lock is tested with its keys before we leave.
What Affects the Cost
Commercial lock pricing depends on:
- Which part has failed: lock body, cylinder, or strike
- Lock type: mortise, cylindrical lever, deadbolt, or storefront deadlock
- Repair, rekey, or replacement
- Standard or restricted, high-security cylinders
- How many doors or cylinders are involved
What to Send Us Before the Visit
These help us bring the right parts:
- Business address and which doors are affected
- Photos of the lock from both sides and the edge of the door
- The brand name stamped on the lock or cylinder, if visible
- A photo of the strike on the frame
- What happens when you use the key or lever
Commercial Lock Brands We Service
Most commercial locks in Washington, DC offices and storefronts come from a handful of manufacturers. We repair, rekey, and replace Schlage, Sargent, Corbin Russwin, Yale, and Arrow cylindrical and mortise locks, along with Adams Rite deadlocks and deadlatches on narrow aluminum storefront doors.
We also install and replace Ilco lock cylinders when a worn cylinder needs replacing or a door needs to match an existing keying system. If you need tighter control over who has keys, see our master key systems page.
Frequently Asked Questions
Q: Should a commercial lock be repaired or replaced?
Q: Can you replace just the cylinder instead of the whole lock?
Q: Why does my key stick or feel hard to turn?
Q: My lock works with the door open but not closed. Why?
Q: Do you install electric strikes and keyless entry?
Q: How is lock repair different from a master key system?
Need Commercial Lock Repair in Washington, DC?
Call DC Locks & Doors at (202) 919-5727. Open daily, 7 AM–11 PM.

