Hollow Metal Door & Frame Replacement in Washington, DC
Steel doors and frames last for years, but rust, impact damage, and break-ins eventually leave them unable to close or lock securely. DC Locks & Doors measures, supplies, and installs hollow metal doors and frames for commercial buildings throughout Washington, DC.
Need a New Steel Door?
Call (202) 919-5727 or request a quote. We measure on site before anything is ordered. Open daily, 7 AM–11 PM.
When a Hollow Metal Door Needs Replacing
These are the most common reasons we replace steel doors and frames:
- Rust that has eaten through the bottom of the door or frame
- Door bent or dented so it no longer closes flush
- Frame bent or split after a break-in or impact
- Door that can't hold its lock, closer, or exit device securely
- Repeated repairs that don't keep the door aligned
- Upgrading a back, service, or stairwell door to stronger hardware
How Hollow Metal Replacement Works
A new steel door only works as well as the frame it hangs in and the hardware fitted to it, so we plan all three together.
On-Site Measuring
We measure the opening, check the frame, and confirm the door size, swing, and handing on site before anything is ordered, since a wrong size or handing causes problems at installation.
Frame Repair or Replacement
Minor frame damage can often be repaired and reinforced. A frame that is badly bent, split, or rusted through is replaced along with the door. Frames set in masonry walls take more work, which we account for in the quote.
Locks, Closers, and Exit Devices
We fit each new door with the hardware it needs: commercial locks and cylinders, a door closer, and panic bars or exit devices where the door requires them. See panic bar repair and installation.
Installation
On installation day we remove the old door (and frame, if it is being replaced), set and align the new one, and fit and adjust the hardware so the door closes, latches, and locks every time. We can add weatherstripping and a door sweep.
Ordering and Timing
Ordering time depends on the door size, hardware preparation, and any rating the opening requires. Standard sizes are generally faster than custom doors. We give you the expected timeline with your quote.
Repair or Replace?
If the door and frame are structurally sound, repair is usually enough: hinges, closers, and hardware can be fixed without a new door. Replacement makes sense when the door is rusted through, badly bent, or the frame can't be realigned. See commercial door repair and door replacement.
What Affects the Cost
Hollow metal door and frame pricing depends on:
- Door size, gauge, and any custom sizing
- Whether the frame is reused, repaired, or replaced
- Wall type around the frame, such as masonry
- Locks, closers, exit devices, and other hardware
- Number of doors
What to Send Us Before the Visit
A few photos help us give you a first estimate before measuring:
- Building address and which door needs replacing
- Photos of the full door from both sides and the frame
- Approximate width and height, if you can measure
- Photos of any damage, rust, and the current hardware
- Whether the door has a label on the hinge edge or frame
Frequently Asked Questions
Q: Do you replace the frame as well as the door?
Q: Do you measure before ordering?
Q: Can you install the lock, closer, and panic bar at the same time?
Q: How long does a steel door replacement take?
Need a Hollow Metal Door or Frame in Washington, DC?
Call DC Locks & Doors at (202) 919-5727. Open daily, 7 AM–11 PM.

