Storefront Door Repair in Washington, DC
Is your aluminum and glass storefront door dragging, sagging, failing to latch, or refusing to lock? DC Locks & Doors handles storefront door repair for shops, restaurants, and offices throughout Washington, DC, from the pivots and closer to the lock and the glass.
Storefront Door Problem?
Call (202) 919-5727 or request a quote for scheduled work. Open daily, 7 AM–11 PM.
Storefront Door Problems We Fix
Storefront doors take heavy daily traffic, and the same few problems come up again and again:
- Door drags on the threshold or rubs the frame
- Door sags and the gap at the top or latch side is uneven
- Door swings open, slams, or doesn't close all the way
- Lock won't throw, or the key or thumbturn is hard to turn
- Latch misses the strike, so the door won't lock
- Cracked or broken glass in the door
What Storefront Door Repair Covers
A storefront door is a system: pivots or hinges carry the door, a closer controls the swing, and a narrow-stile lock secures it. We check all of them together, because one worn part usually shows up as a problem somewhere else.
Alignment and Pivots
Most dragging and sagging storefront doors hang on worn top or bottom pivots. We adjust or replace the pivots and realign the door so it clears the threshold and lines up with the lock. See commercial door pivot repair for details.
Concealed Closers
Storefronts usually use a concealed overhead closer in the frame header or a floor closer under the door. We adjust closing and latch speed, repair the arm and track, or replace a closer that leaks or won't hold an adjustment. See door closer repair.
Storefront Locks
Narrow aluminum stiles use slim deadlocks and deadlatches, such as Adams Rite, operated by a key cylinder or thumbturn. We repair, rekey, and replace storefront locks, cylinders, and strikes. See commercial lock repair.
Thresholds and Glass
We replace worn thresholds, sweeps, and weatherstripping that let in drafts or catch the door. We also replace cracked or broken glass in storefront doors. Tell us the size and type of glass if you know it, and we'll confirm the replacement before scheduling.
What Happens During the Appointment
We watch the door open, close, and lock, then check the pivots, closer, threshold, and lock together. We explain what we found and give you the price before starting, and we cycle the door several times after the repair to confirm it closes, latches, and locks.
Repair or Replace?
Most storefront doors can be repaired: worn pivots, closers, locks, and glass are all replaceable parts. Replacement makes more sense when the door frame is bent or the door is badly damaged after a break-in. We tell you which applies before any work starts. For other entrance problems, see commercial door repair.
What Affects the Cost
Storefront door repair pricing depends on:
- Which parts are failing: pivots, closer, lock, threshold, or glass
- Whether an adjustment will hold or parts must be replaced
- Closer type: concealed overhead or floor closer
- Glass size and type, if glass is being replaced
- How many doors need service
What to Send Us Before the Visit
These details help us diagnose the door and bring the right parts:
- Business address and which entrance needs work
- Photos of the full door from inside and outside
- Photos of the top and bottom pivots, the closer, and the lock
- A short video of the door closing, if you can
- For glass: a photo of the damage and the approximate size
Frequently Asked Questions
Q: Why does my storefront door drag on the ground?
Q: Can you replace the glass in my storefront door?
Q: My storefront door won't lock. Is it the lock?
Q: Do you repair concealed and floor closers?
Q: Can I schedule repairs outside business hours?
Need Storefront Door Repair in Washington, DC?
Call DC Locks & Doors at (202) 919-5727. Open daily, 7 AM–11 PM.

