Commercial Door Repair Washington DC
Is your commercial door dragging on the floor, slamming shut, or failing to latch? The cause is often the hinges, closer, frame, or strike rather than the lock, because every part of a commercial entrance works together.
DC Locks & Doors handles commercial door repair for storefront, office, and multi-tenant entrances throughout Washington, DC. We find the part that's actually failing before replacing anything. Door won't secure right now? See emergency commercial door repair.
Need Door Repair Service?
Call (202) 919-5727 or request door repair online. Open daily, 7 AM–11 PM.
Common Door Problems and Likely Fixes
Most commercial door problems show up in a few predictable ways. Here is what each symptom usually points to. We confirm the cause on site.
- Dragging on the floor or frame — worn hinges, pivots, or loose hinge screws; hinge repair, a continuous hinge, or realignment
- Slamming or closing too fast — closer speed or a failed closer; door closer adjustment or replacement
- Failing to latch — sagging door, misaligned strike, worn latch, or weak closer; alignment, strike, or lock repair
- Worn or loose hinges — hinge replacement, or a continuous hinge on heavy, busy doors
- Damaged or bent frame — frame repair when possible; replacement when it can't be realigned
- Panic bar won't catch — exit device adjustment or repair
- Lock or key failing — lock, cylinder, or strike repair
Commercial Door Services
Most commercial door failures come down to hardware or alignment, not the door slab itself. Choose the service that matches your door:
- Storefront door repair — aluminum and glass doors, pivots, concealed closers, storefront locks, and glass
- Commercial door pivot repair — sagging and dragging doors on worn pivots
- Emergency commercial door repair — doors that won't secure, break-in damage, failed exit hardware
- ADA automatic door openers — push plates, wave switches, and sensors
If the lock itself has failed, see commercial lock repair. To move away from physical keys, see access control systems.
Door Alignment and Frame Repair
Building settling, worn hinges, and daily traffic can pull a door out of line with its frame and strike, so it binds, drags, or won't latch. We tighten or replace hinge fasteners, adjust or replace hinges and pivots, reset the strike, and correct minor frame problems so the door and lock line up again.
Door Closers
A closer that slams, drifts, or stops short keeps the door from latching, even when the lock is fine. We adjust, repair, and replace surface, concealed, and floor closers. Details are on our door closer repair page.
Panic Bars and Exit Devices
Exit devices wear from constant use and can stop catching the strike. We adjust, repair, and replace them, and check the door and closer at the same time. See panic bar repair for device types and repair options.
Hinges, Pulls, Plates, and Weatherstripping
One visit can cover the hardware that keeps a door hanging straight and sealing well: SELECT continuous hinges and Hager, McKinney, Stanley, and Ives hinges; Rockwood pulls, push plates, and kick plates; Don-Jo wrap-around plates; and NGP door sweeps, thresholds, and weatherstripping. On automatic entrances we replace BEA sensors; see ADA automatic door openers.
What Happens During the Appointment
We watch the door open, close, and latch to see where it fails. Then we check the hinges, closer, frame, strike, and lock together, since one worn part often causes problems elsewhere.
We explain what we found and your options, along with the price, before starting. After the repair, we cycle the door several times to confirm it closes, latches, and locks.
Repair or Replace?
Repair or adjust first when the door and frame are structurally sound. Replacement makes more sense when a frame is bent or split badly enough that the door can't be realigned, when the door itself is warped, rusted through, or coming apart, or when hardware is cracked or no longer supported. Minor frame damage can often be repaired. We tell you which applies before any work starts.
If the door or frame needs to go, see door replacement.
What Affects the Cost
Commercial door repair pricing depends on what is failing and what it takes to fix it:
- The parts involved: hinges, closer, strike, exit device, or lock
- Whether an adjustment will hold or parts must be replaced
- Door type and weight: storefront, steel, wood, or glass
- Frame condition and how much alignment work is needed
- How many doors need service
What to Send Us Before the Visit
These details help us diagnose the door and bring the right parts:
- Building address and which entrance needs work
- Photos of the full door from both sides, plus the hinges, closer, and strike
- A short video of the door closing, if you can
- What changed: slamming, dragging, not latching, or damage
- Building access hours and an on-site contact
Frequently Asked Questions
Q: Should a commercial door be repaired or replaced?
Q: What causes a commercial door to stop closing or latching?
Q: Why does my door drag on the floor?
Q: Do you repair storefront and glass commercial doors?
Q: Can a misaligned door cause lock problems?
Q: Do you work with property managers on multiple buildings?
Need Commercial Door Repair in Washington, DC?
Call DC Locks & Doors at (202) 919-5727. Open daily, 7 AM–11 PM.

